免费一级a毛片在线播放'视频正片,欧洲破处AV,妖精囯产A片,九九热视频这里只有精品,国产美女在线一区二区三区,国产18在线播放

Guangzhou Tabard Fire-Proof Materials Co. Ltd. / Guangzhou Tabard Special Coating Engineering Co. Ltd. 

Details

Home  > PRODUCTS  > Anti-corrosion coatings > Primer > Details
CF-1 Alkyd Rusty Red Anti-Rust Paint
  • CF-1 Alkyd Rusty Red Anti-Rust Paint
  • Specifications
    • Product Name：CF-1 Alkyd Rusty Red Anti-Rust Paint
    • Product Number：CF-1
    • 分享到：
  • Details

  • Product Description

    It is prepared by refined dry planting oil modified alkyd resin, pigment, extender pigment, desiccant, special additive and organic solvent. It may be dried under normal temperature and may also be dried under low temperature; easy polishing, good adhesion force for putty layer and finish paint.


    Design Purpose 

    It may be coated on the polished putty layer so as to flatly fill the sand hole and track, and it may also be coated on the alkyd primer additionally so as to increase the anti-rust property.


    Physical Parameters

    Color

    Rusty red

    Luster

    Lightless

    Theoretical spreading rate

    150g/m2, 10.70m2/L (calculated in 45μm dry film, excluding the loss)

    Specific gravity:

    About 1.60

    Drying time

    23±2℃: surface dryness≦4h, solid dryness≦24h

    Flash point

    35℃

    Storage period

    12 months

    Construction Instruction

    Mixing ratio

    Canned by single pot

    Maturing time

    Use immediately after opening and stirring uniformly

    Service life

    Unlimit

    Construction method

    High-pressuresiphon spray, normal spray; manual painting;  roller coating  

    Diluent

    X-6 Alkyd coating diluent

    Maximal dilution amount

    High-pressuresiphon spray

    Normal spray

    Manual painting;  roller coating

    5%

    10%

    3%

    0.4~0.5mm

    2.0~2.5mm

    -

    12~15Mpa

    0.3~0.4Mpa

    -

     

    Spray orifice

    Spray pressure

    Tool washing

    X-6 Alkyd coating diluent

    Film coating thickness

    Wet film: 95μm                     Dry film: 55μm

    Coating interval

    Temperature of substrate

    5℃

    20℃

    30℃

    Shortest

    36h

    24h

    12h

    Longest

    Unlimit

     

    Surface treatment

    If previous pass of paint surface has been polluted,  the appropriate method should be adopted to remove the grease and dust, this paint diluent may also be utilized for wiping.

    Construction condition

    The temperature of substrate must be 3℃ higher than dewing point, and the relative humidity must be less than 85%.

    Prior primer

    Alkyd red lead anti-rust paint

    Finishing paint

    Alkyd enamel paint,alkyd tempered paint

    Packing Specification

    25Kg/20L per barrel

    Safety guide  

    Avoid breathing solvent steam or paint fog for a long term; the skin and eye can’t contact this product; while constructing in the narrow place or poorly ventilated place, the forced ventilation must be provided; while constructing, the protective articles should be worn.

    “Annotation

    ＊Above-said thickness of dry film and wet film refers to the index while implementing the high-pressuresiphon spray;

    ＊Relevant data in this instruction is obtained from laboratory, the actual product may be slightly different from it;

    ＊If above data is changed, the data is based on the latest instruction, without prior notification.

Tags：