免费一级a毛片在线播放'视频正片,欧洲破处AV,妖精囯产A片,九九热视频这里只有精品,国产美女在线一区二区三区,国产18在线播放

Guangzhou Tabard Fire-Proof Materials Co. Ltd. / Guangzhou Tabard Special Coating Engineering Co. Ltd. 

Details

Home  > PRODUCTS  > Anti-corrosion coatings > Primer > Details
HF-5 Epoxy Zinc Phosphate Anticorrosive Paint
  • HF-5 Epoxy Zinc Phosphate Anticorrosive Paint
  • Specifications
    • Product Name：HF-5 Epoxy Zinc Phosphate Anticorrosive Paint
    • Product Number：HF-5
    • 分享到：
  • Details

  • Product Description

    It is composed by epoxy resin, zinc phosphate, rust preventive additive, promoter and solvent, etc., and the paint takes polyamide as curing agent. Packaging is divided into Component A and Component B. The paint has greater sealing ability and good anticorrosion performance and can be mixed with various finishes.


    Design Purpose

    As a kind of antirust paint, it can be used for ship, bridge, gas holder and various steel structures and cement.


    Physical Parameters

    Color:

    White

    Luster

    Semi-gloss

    Theoretical spreading rate

    250g/m2, 5.8m2/L (calculated by 75μm dry film, excluding loss)

    Specific gravity:

    About 1.45

    Drying time

    23±2℃: surface dry :2h, hard dry: 24h

    Entirely cured

    23±2℃: 7d.

    Flash point

    23℃

    Storage period

    12 months

    Construction Instruction

    Mixing ratio

    Component A (paint): Component B (curing agent)=6:1

    Maturing time

    25℃: 0.5~1h

    Service life

    25℃: 8h

    Construction method

    High pressure siphon spray, air spray, manual brushing, roller painting.

    Diluent

    Diluent for X-7 epoxy coating




    The largest amount of dilution

    High pressure siphon spray

    Air spray

    Manual brushing, roller painting

    5%

    10%

    3%

    Spray orifice

    0.4~0.5mm

    2.0~3.0mm

    _

    Spray pressure

    15~30Mpa

    0.3~0.5 Mpa

    _

    Tool washing

    Diluent for X-7 epoxy coating.

    Film coating thickness

    Wet film: 175μm, dry film:75μm

    Coating interval

    White

    Substrate temperature

    5℃

    20℃

    30℃

    Minimum

    48h

    25h

    12h

    Maximum

    3 months

     

    Surface treatment

    Surface of the steel shall be treated with sand-blasting to reach Swedish de-rusting standard, Class Sa 2.5, or Class St3 of manual mechanical de-rusting.

    Construction condition

    Substrate temperature shall be more than dew point above 3℃, relative humidity shall be less than 85%;

    If the substrate temperature is lower than 5℃, epoxy and curing agent stop reaction, construction can’t be undertaken.

    Finishing paint

    Epoxy resin coating, chlorinated rubber coating, acrylic resin coating, polyurethane coating, alkyd resin coating.

    Packing Specification

    Container of 20 liters can load Component A of 24kg, container of 5 liters can load Component B of 4kg.

    Considerations

    If maximum coating interval is exceeded, the coating shall be conducted after the preceding paint is polished roughly to ensure the adhesion between films.

    Safety guide 

    Avoid inhaling solvent vapors and painting mist for long term, skin and eye may not contact with the product.

    Forced ventilation shall be provided when applying the paint in confined spaces or stagnant air, although in good ventilation, protection tools shall be worn.

    Annotation

    ＊Above-said thickness of dry film and wet film refers to the index while implementing the high-pressure siphon spray;

    ＊Relevant data in this instruction is obtained from laboratory, the actual product may be slightly different from it;

    ＊If above data is changed, the data is based on the latest instruction, without prior notification.



Tags：