Primer
Product Description
It is composed by chlorinated rubber, plasticizer, iron oxide red, promoter and solvent, etc. It has good water, base, salt and fog resistance and good wet-dry rotation performance. The film is tough and has good sealing performance.
Design Purpose
It is used as additional paint for chlorinated rubber aluminum powder antirust paint to enhance the antirust effect; and it is can be used as seal coat for repairing the old film of the ship, also can be used for rust protection of ship, harbor machinery and offshore platform and other steel structures.
Physical Parameters | Color: | Rusty red | ||||||||||||||
| Luster | Lusterless | ||||||||||||||
| Theoretical spreading rate | 270g/m2, 4.93m2/L (calculated by 70μm dry film, excluding loss) | ||||||||||||||
| Specific gravity: | About 1.33 | ||||||||||||||
| Drying time | 23±2℃: surface dry ≤2h, hard dry≤8h | ||||||||||||||
| Flash point | 38℃ | ||||||||||||||
| Storage period | 12 months | ||||||||||||||
Construction Instruction | Mixing ratio | Single canned | ||||||||||||||
Maturing time | Ready to use when being opened and stirred. | |||||||||||||||
Service life | Unlimited | |||||||||||||||
Construction method | High pressure siphon spray, air spray, manual brushing, roller painting. | |||||||||||||||
Diluent | Diluent for X-14 chlorinated rubber coating | |||||||||||||||
The largest amount of dilution | High pressure siphon spray | Air spray | Manual brushing, roller painting | |||||||||||||
5% | 10% | 3% | ||||||||||||||
Spray orifice | 0.4~0.5mm | 2.0~2.5mm | _ | |||||||||||||
Spray pressure | 15~20Mpa | 0.3~0.4 Mpa | _ | |||||||||||||
Tool washing | Diluent for X-14 chlorinated rubber coating | |||||||||||||||
Film coating thickness | Wet film: 200μm, dry film:80μm | |||||||||||||||
Coating interval |
| |||||||||||||||
Surface treatment | *If directly applying to the steel surface, Surface of the steel shall be treated with shot-blasting or sand-blasting to reach Class Sa 2.5 of Swedish de-rusting standard. *Surface coated with Workshop primer needs second rust removal to reach Class St 3 of Swedish de-rusting standard. *When the paint is used for large scale replacement and maintenance, steel plate shall be derusted by sand blasting to reach Class Sa 2.5 of Swedish de-rusting standard, as for small scale replacement and maintenance, steel plate shall be derusted by manual de-rusting to reach Class St 3 of Swedish de-rusting standard. | |||||||||||||||
Construction condition | Substrate temperature shall be more than dew point above 3℃, relative humidity shall be less than 85%; | |||||||||||||||
Prior primer | Zinc-rich epoxy primer, epoxy zinc powder Workshop primer, epoxy iron red Workshop primer, inorganic zinc silicate Workshop primer, also directly apply to the steel by rust removal. | |||||||||||||||
| Finishing paint | Chlorinated rubber boat topping paint, chlorinated rubber topside paint, chlorinated rubber deck paint, chlorinated rubber finish, acrylic acid finish and high chlorinated polyethylene enamel. | ||||||||||||||
Packing Specification | Container of 20 liters can load 20kg. | |||||||||||||||
Safety guide | Avoid inhaling solvent vapors and painting mist for long term, skin and eye may not contact with the product. Forced ventilation shall be provided when applying the paint in confined spaces or stagnant air, although in good ventilation, protection tools shall be worn. | |||||||||||||||
Annotation | ＊Above-said thickness of dry film and wet film refers to the index while implementing the high-pressure siphon spray; ＊Relevant data in this instruction is obtained from laboratory, the actual product may be slightly different from it; ＊If above data is changed, the data is based on the latest instruction, without prior notification. | |||||||||||||||
0086-20-37398166
tabarda@gztabard.com
Production base: Huadu District, Guangzhou, North Xing Zhen Xin Industrial Park Tamura